Posts that chris9485 is monitoring

Subscribe to Posts that chris9485 is monitoring 10 posts found

Jul 30, 2007
Av-4118 Windyhill 345 posts

Topic: Lengthened clubs...Who has them?

Thanks Wondyhill – you keep putting a space in front of the first word of some of your paragraphs and that causes the paragraph to be on one line. Just watch for that and you’ll be fine. Seems you do it on the 2nd paragraphs – fixed the ones here.

Yeah…I always put in spaces…lol

I’ll do it without from now on…thanks admin;)

 
Jul 30, 2007
Av-2 admin 3306 posts

Topic: Lengthened clubs...Who has them?

Thanks Wondyhill – you keep putting a space in front of the first word of some of your paragraphs and that causes the paragraph to be on one line. Just watch for that and you’ll be fine. Seems you do it on the 2nd paragraphs – fixed the ones here.

 
Jul 30, 2007
Av-4118 Windyhill 345 posts

Topic: Lengthened clubs...Who has them?

You can hit the “quote” button to read the posts in full.

Looks like the problems from my end:( I’ve emailed admin for a solution.

 
Jul 29, 2007
Av-4118 Windyhill 345 posts

Topic: Lengthened clubs...Who has them?

Hey I’m 6’1” as well and my irons are an 1” over standard. There are also 2* upright. My wrist to floor measurement shows an inch over a standard 37.5” five iron. I think the lie is about right.

Normally someone my height should be able to use standard length clubs. However, I certainly like the extra length. I’m very broad in the shoulders and maybe that’s why my arms don’t hang down enough. I’m also fairly long in the legs. Anyway, I’m happy with the length and would only consider shortening my irons if I went to 3 or 4 * upright.

I hope this post doesen’t make the words break the barrier like my last one. I’ve emailed Admin and now lets cross my fingers:)

 
Jul 29, 2007
Av-4758 ddasey 185 posts

Topic: Lengthened clubs...Who has them?

I am also 6’1”.

I had my clubs lengthened by 1”.

I now seem to be hitting the ball a lot sweeter ( I didn’t say straighter) and not off the toe of the club.

 
Jul 29, 2007
Av-3737 qbnchopper 346 posts

Topic: Lengthened clubs...Who has them?

Mizuno “standard” + 1/2 inch … got them staically and dynamically fitted …

 
Jul 27, 2007
Iseekgolf_80 mickyboy 306 posts

Topic: Tommy Armour Silver Scott irons

I have a set of these in the 5.0 flex combo set with 3-5 CB and blades from 6-pw. If you are looking at the ones from the Bay then the rifle shafts are the high launch version, slightly higher ball flight than the standard rifles but very little difference. I wouldn’t worry too much about your swing speed as I swing at 100 mph avg with my irons and hit the 5.0 flex. I have actually slowed it down to increase my accuracy and to take advantage of hitting a softer flex than I have always played. The rifles tend to play a little stiffer than the DG’s. The ‘forged’ heads are not like hitting a mizzy forging or the like as they are not really all that soft. I would say softer than cast but not even close to any decent forged iron. The blades and CB do give you good feedback on mishits, but they are not as forgiving as other CB’s on the market. I like this as it helps for improvement and they are very workable in both CB and obviously blade design. But for the price, they are a very very very good buy. Probably the best buy out there considering the shafts are at least $150-180 to buy alone. Should be able to pick them up for less than this. cheers

 
Jul 26, 2007
Av-3904 NigelO 1028 posts

Topic: Tommy Armour Silver Scott irons

Gday guys,

Any one had much experience with the Tommy Armour Silverscott forged irons (cavity back model). I am looking at a set on ebay with rifle 5.0 shafts. I have hit some with s300’s and found them to be very nice, fairly forgiving for a forged club also. Is there a great deal of difference with the s300 to the rifle 5.0? Any suggestions would be appreciated guys….

chris

Yes the proflie and flex are different. The 5.0s will feel a little softer at impact. Great shaft around the 120-130gram mark swing speed should be around the 75-80ish mark ball park, depends, on tempo,and release. the shaft has a mid bend point with a medium tip section.

s300 have a high bend point with a firm tip section your swing speed would want to be around the 80-85ish mark at least.weight 130 grams

People tend to be DG or a rifle fan. DGs don’t do it for me, to firm in the tip section I tend to try and hit them to hard, and end up hitting them low and left. Cheers nigel

 
Jun 15, 2007
Iseekgolf_80 nampol 6 posts

Topic: Taylor Made Stand Bags

I’m looking to buy Ogio grom as well. where did you find it at that price? Is it include delivery?

 
Jun 15, 2007
Iseekgolf_80 draco 24 posts

Topic: Taylor Made Stand Bags

thanks for the heads up snedden… i was just about to order one of that TM stand bag on ebay..