I seem to have somewhat of a fetish for golf clubs so what is it that you use? Also i’m really bored.
Driver: Titleist 983k 9.5.
3 wood: Taylormade 200 Steel 15.
Hybrid: Taylormade Rescue Mid 19.
Irons: Titleist 4 – pw, sw, lw, Cleveland 588 gw 53.
Putter: Ping Zing 2.

Driver: one day…... Fairway: Rapier crappy 3 wood Hybrid: “Attack” #4, Graman CF310 Shaft Irons: RX-3 Alpha Irons 5i-Pw, Graman CF310 shafts, Wedges: Purespin Sandwedge FST shaft. Putter: Dynacast Mallet

Driver 14 deg square face angle 460cc 43.5 lenght 65 gram shaft. D6 swing wight. Avg drive 220-230 meters

Strong 7 wood 21 degs 42.5 long, 80 gram shaft. 200m of the deck and tee. reason I needed a second wood I could hit off the deck and tee consistanly and I have a neg AOA.

27deg Hybrid/wood 41.5 long, TX 90 TT steel shaft. 180-190m off the deck. I find this club great for long par 4s helps me launch the ball high of the deck.

Hybrid 24degs, 27degs and 31 degs, my hard to hit long iron replacements, these all standard iron lenghts with steel wood shafts, to help launch the ball higher and have great off center hit forgivness.

6i – Pw cav back fordge irons

52 deg, 56 deg and 60 deg wedges blade style. Gen full swing with 52 wedge 100- 80m

56 80-60m and chipping around the green and somtimes with longer sand shots.

60deg for lob and sand shots.

This is just my set up and has taken me 2 years of building to get my set up right.

Bad news is I’ve just cracked the crown on my driver head as of yesterday. It had been in the bag for over two years.

major bummer. is the same model etc still available?

Driver: Srixon 506, 9.5deg, 44”, stock stiff shaft.
Hybrid: Mizuno Fli-Hi CLK 17deg, UST Irod stiff shaft.
3-SW: Daiwa SRX-1 (cast clubs, really old!).
Putter: PGF Optima forged blade. (brass head).

In My Bag:

Driver: TM Superquad 10.5 Stiff

3-Wood: None

Hybrid: None

Irons: Ben Hogan Apex Edge 3-E

Wedges: Ben Hogan Apex 52* and 56* Vokey Spil Milled 60* Shark 64*

Putter: Odyssey White Hot XG #1

Bag: Ben Hogan BH5 Stand Bag

Ball: Hogan Tour Deep

TM R510TP, ozik altus xx flex prototype shaft made for tiger woods Tour edge exotics 3 wood, speeder 757 x flex Adams Idea a2 16degree hybrid Mizuno mx-23/mp-37 irons, s300 Vokey wedges 48, SM 56,60 Scotty cameron newport 2

Driver: Cleveland Hi Bore 9.5 V2 Reg shaft 45 inches (looking to change to 10.5 stif with a 44 inch shaft in something else though) Woods: Nike SQ sumo 13 deg reg shaft, Wilson fws 5 wood reg Hybrids: Srixon AD 18 & 21 deg Irons Wilson PI5 Wedges Cleveland CG 11 (52,56,60)...sometimes carry all 3 or 2 Putter: Odyssee White steel Rossie 35 inch Ball: Bridgestone BB 330s

I have about 3 sets of iirons in my shed,2 drivers (srixon 506 and Nike SQ) and numerous putters

yes Im a golf gear junkie

I see Golf as a hobbie as well as a sport

major bummer. is the same model etc still available?

Yep, I’ve got a spare one, just built it up as of a hour ago.

Driver: Snake eyes 650T (44” Aldila NV65 stiff)

5Wd: Snake eyes Quick Strike 2 (18* with rifle flighted reg graphite)

Hybrid: Ben Hogan 21* 3 iron (Graphite reg) – Just got it

Irons: Magregor M685 Mactec Cavs 3 – PW (Rifle flighted 5.5)

Wedges: Snake eyes 56 SW forged (Rifle 5.5), Precept Tour premium 60* lob wedge

Ogio Stand Bag.

Driver- Titleist 905R Graphite Design 43” YS+6

Fairways- 15* and 19* Titleist 904F Graphite Design YS+6

Irons- Taylormade RAC OS2 Graphite Irons

Putter- Some $13 Ping G2-I Crazy Imitation

Driver – srixon w-506 45 inch 9.5 nv stiff

Fairway – callaway warbird 5 wood aldila hm 2000 stiff

Irons – srixon 506 3-pw s300

Wedges – mizuno t series 51 gap , nike sv milled 56 sw , mizuno t series 60 lob

Putter – never compromise exchange centre shaft 34 inches

Bag – srixon big bite ltd edition

Ball – srixon zurc or bridgestone b330s

Driver – srixon w-506 45 inch 9.5 nv stiff

Fairway – callaway warbird 5 wood aldila hm 2000 stiff

Irons – srixon 506 3-pw s300

Wedges – mizuno t series 51 gap , nike sv milled 56 sw , mizuno t series 60 lob

Putter – never compromise exchange centre shaft 34 inches

Bag – srixon big bite ltd edition

Ball – srixon zurc or bridgestone b330s

How do you find the srixon i506 irons? I have another set of these coming. I played them a while back and really loved the leading edge, just suited my contact with the ball. I am tempted to leave them in the wrappers and sell or store them away for a rainy day as I have too many sets at the moment.

yeah mickyboy they are great irons but i am getting the new i-701 tours in 2 weeks but i think i will keep my 506 irons as they are a sweet thing i know the srixon rep and he wants me to use the current product only but the 701 tour has the goods to be possibly the best players forged iron of 2008

Driver – Nakashima NP1 Fairway – Titleist 904F 15deg Hybrid – 19deg TM Rescue Mid Irons – Hogan Apex Edge 3 – PW Wedges – Titliest Vokey 52deg + Cleveland CG10 58deg Putter – Yes! Tracey

Driver - Nakashima H-Tec 9.5º with Proforce V2 S Flex 44.25’’ shaft. Lamkin Midsize grip.

Woods - SMT Solitaire 2.5 (14º) and 4.5 (19º) with TX90 R Flex shaft. Lamkin Midsize grips

4 – 6 Irons - Wishon 550C with TX Tour S Flex shafts. Lamkin Midsize grips

7 – PW, AW - Wishon 550M with TX Tour S Flex shafts. Lamkin Midsize grips.

SW, LW - Wishon PCF Chrome 56º and 60º with TX Tour S Flex shafts. Lamkin Midsize grips.

All irons have been MOI matched.

Putter - Ping G2i B60 with 35” shaft.Orange Dot (2º upright)

Staff Bag – Snake Eyes 9.5” Staff Bag

Stand Bag – SMT Stand Bag

Ball – Precept U-Tri Extra Distance

I’m a lefty – (Srixon please make lefty models again so I can update)

Driver- Srixon 403AD 10* stock shaft – 230 ave 3 wood – Srixon 403AD – only comes out during ambrose days Irons – 403 AD 3-SW – steel shafts – love long irons Putter – Pole Kat – $40 Ebay absolute bargain.

UPDATE.
Driver: Titleist 983k 9.5deg, Aldila NV reg, ave 255 – 260.
3 wood: Taylormade 200 Steel 15deg, Taylormade lite s90 stiff shaft
Hybrid: Taylormade Rescue Mid 19deg, Taylormade ultralite stiff shaft
Irons: Titleist DCI Black4 – pw, sw, lw, Tri Spec stiff shafts
Gap Wedge: Cleveland 588 diadic 53deg, stiff shaft?
Putter: Ping Zing 2 with new winn ping grip.

Driver: 9.5* Taylor Made r7 425 TP w/ 65 Rombax Stiff

3 wood: 14* Sonartec SS 2.5 w/ DG S300

5 wood: 19* Sonartec SS 2.5 w/ DG S300

Irons: Mizuno MP 60 3-PW w/ DG S300

Wedges: 52* & 58* Titleist Vokey 200 series w/ DG S300

Putter: Ping G2 C67

Driver – Titleist 905R 10.5­° With ProForce V2 65 Stiff. 5g of lead tape on the head and counterweighted with 25g in the butt. Playing 44.5”

3 Wood – Titleist 904F with ProForce V2 75 Stiff. Counterweighted with 15g in the butt. Playing 42.5”

Hybrid – Srixon AD Hybrid 19°- Revised Version, with ACCRA Tour HF .370 M4. Counterweighted with 12g in the butt. Playing 40.5”

Irons – Callaway X-Forged with Dynamic Gold S300. 6 Iron is 38” and trimmed at .4 inch increments. 3-PW

Wedges – Callaway X-Tour 52° and 58°. Dynamic Gold S300 at .5inch over

Putter – Rossa Monza Corsa Center Shaft with ASGI+. Japanese Imported and has a Golf Pride Dual Durometer.

All clubs have Star Grips Sidewinder with +2 Tapes

Driver: one day…… Fairway: Rapier crappy 3 wood Hybrid: “Attack” #4, Graman CF310 Shaft Irons: RX-3 Alpha Irons 5i-Pw, Graman CF310 shafts, Wedges: Purespin Sandwedge FST shaft. Putter: Dynacast Mallet

Pick it up, look down the barrel, pump it, mean it.

Member of the Golfers against H.I.L.A.C society.

Still no Scotty Cameron then …................ !!??

Here’s todays bag.

Bang Bang-o-matic 12º driver with Graman UL440 shaft R flex 45.5” Mac Burrows 3 wood with HTD CBS shaft. Best $10 3 wood I’ve hit. The head is tiny compared to some going around at the mo. Silver Diamond 19º Hybrid mated to a Graman CF300 shaft. 3-9 iron are Dynacast Purefit cavity jobbers with TM TK steel shafts. They cost me $41! + $25 for the TaylorMade shafts. That’s the set ..not each. Don’t laugh. F@#* they hit it high. That’s why I have to carry the 3 iron. PW is my Nak NP-1 as I broke the Dynacast one bending it last week. I said stop laughing. Gappie is a 54º Cleveland bent to 53º SW is a XDS Tour 56º bent to 58º

Putter is Wilson Staff KCIV cut to 32”

All shafts flo’d yada yada….

I’ll probably have new irons next week so maybe I’ll post another pic.

This week: Driver: Cobra 450SZ Tour 8* Penley “R” stiff tip Fairway: TM Rescue TP 14* Fujikura “S” Hybrid: Mizuno Fli-Hi 18* S300 Irons: Wilson Staff FatShaft 3-PW Wedges: Nakashima NP-1 56* (bent to 53) & Mizuno Raw Haze 60 Putter: Ray Cook extra heavy blade (greens sanded & cored this week)

Last week: Driver, Fairway & Hybrid: same Irons: TM R7 TP 3-PW S300 (these for sale $650 ono) Wedges: same Putter: Srixon P-513 (will be back when greens quicken up again).

Week before: Driver: TM R580XD TP 7.5* with Graman Limey UL440 “S” (shaft being donated to a mates driver). Fairway & Hybrid: same Irons: Nakashima NP-1 forged 3-PW S300 (will be back when Project X shafts arrive). Wedges: same Putter: same

So, who’s a “golf gear junkie”? 8)

Driver – Bridgestone J33P 9.5. Aldila NV 65 R 45.5” Maybe too low in loft for someone with my swingspeed. However, it works consistently better than any other driver I’ve tried.

3 wood – MacGregor V foil 13* loft 43”. Again too low a loft. but it works. I have 2 other 15* 3 woods and the 13* works the best..go figure!! One could say none of them suit me..lol

5 wood- Mac Burrows 18* Fuji R shaft 42.5”, don’t really like it, however, it’s very consistent and I’d be better off improving me before replacing the club! TM midsize system 2 seven wood 22* 41” with flextwist S shaft. Over ten years old and always in my bag.

Irons- work in progress:)

Wedges- Cobra Greg Norman series 54/57/60 Mac Burrows 52/56/60

Putter- Wilson Staff Kirk Currie semi mallet, 35” Dint semi blade style putter 35”

Driver: TM r7 425

3 Wood: TM r7 Steel

Irons: Mizuno mx-25 3-PW

Wedges: Vokeys: 52/56/60

Putter: Custom Byron