Shaft for Hi-Bore XL.

ForumsGolf Equipment | 10 posts
 

Got one with the wrong shaft, a “fit on M gold, 3.8 torque, low/mid kickpoint” in Reg.
i haven’t hit it yet, but i’m guessing i’ll hit it too high as i already hit what i currently have with an NV reg in it pretty high.
Anyway, im looking for shaft suggestions as to what might lower the ball flight.
SS = 100 – 105mph, quickish tempo at times.
Thanks.

 

You’re surely a stiff even at mid tempo if your 100-105 is measured properly. Have you hit drivers with stiff shafts? What loft is your XL? I have an 8.5* with BB73s and it’s a superb shaft, but expensive. Got my combo uber cheap, shaft is factory installed. The ideal would be to go hit the XL (not neccessarily yours) on a monitor. There’s a lot more info needed to make an informed judgement i think.

 

Haven’t yet, my fairway woods/hybrid is stiff, but irons and driver are reg.
It’s a 9.5*, i got it for $100, so i can splurge a bit on the shaft i guess.
How much does it cost to fit anyway?
The reason i have never hit one is that i have never seen a left handed one in stores, i got this one off the net.

 

Don’t jump to conclusions Tom. I know players who swing 115+ who use reg flex shafts (I’m one of them).
Getting fitted as a lefty is going to be a pain for you my friend.
Come back to us after you’ve hit it & tell us more.

Home on The Range

 

Finally got out for a hit.
Surprisingly, very happy with the results.
Alot straighter and a little further.
Does this mean all the hype about low torque and high kick points is merely hype?

 

No it just means that what you think you need & what you actually need are two different things.

Home on The Range

 

I have the normal HiBore and Aldila NV 65 reg shaft and i hit it way too high. Will a stiff shaft cure this problem? Whats the best shaft to get?

Shouldn't I be working.........?
Age: 22
HCP: 10.3
Favourite Hole: 7th, Howlong Golf Club, NSW

 

Yeah, i hit mine too high aswell, but i dont think it justifies a change.
I’ve heard stiffer, lower torque, higher kick point, and heavier weight lowers it, but i can’t really say.

 

I have the normal HiBore and Aldila NV 65 reg shaft and i hit it way too high. Will a stiff shaft cure this problem? Whats the best shaft to get?

Shouldn’t I be working…......?
Age: 22
HCP: 10.2
Favourite Hole: 7th, Howlong Golf Club, NSW

Better to try heavier than stiffer.

Home on The Range

 

Have to agree with Timatldg, go heavier rather than stiffer if there’s only slight unhappiness. Heavier shaft arguably makes it perform like it’s stiffer but you’ll be able to maintain your tempo and still feel like you’re crushing it.
The carbon Aldilas’ seem to perform better with a smooth tempo IMHO.

I had a 10.5 XL with a stock Fuji red in it and I used to pop it up if I wasn’t carefull. I swing at 105mph and I thought that I couldn’t really use the (stiff) Fuji red shaft also. If the driver wasn’t non-conforming I would have tried the regular Fuji red or the stiff Fuji gold.

I now have a 9.5 XLS with a factory fitted Aldila VS proto ‘By you’ in it (Blue colour). It’s a low kick point compared to the Green Aldila and really like it.

I put up some posts here: http://forums.iseekgolf.com...
explaining my thoughts…Sorry it’s a bit biased, but I love the things.

ForumsGolf Equipment